We carry a huge selection of Competition Plumbing Parts!
 
 
 
Check us out on Instagram
 
Your IN STOCK source for quality racing supplies!
 
Follow us on facebook
 

Tilton Hydraulic Release Bearing Replacement Bearings

These bearings are designed to fit Tilton hydraulic release bearings. Different contact diameters are available to work with different clutches.

The 44mm and 38mm can have the outer race pressed into the piston (inner race rotates), but a nylon spacer and a circlip are provided for self-centering installation.
The 52mm is installed by pressing the inner race over the piston (outer race rotates).

Recommended Bearing Applications
Tilton
Racing Clutches
AP
Racing Clutches
QuarterMaster
Racing Clutches
Other
Clutches
Bearing
Contact Diameter
Master Cylinder
Bore Size
4.5" (OT-V)
5.5" (OT-III)
Some 5.5" Carbon
(CP6913/CP6914
and CP7543 only)
- - 38mm (1.5") 5/8"
7 1/4" (OT-II) * - All 5.5"
7 1/4" (except LGC)
- 44mm (1.73") 3/4"
8 1/2" 4.5", 5.5", 7.25"
(Except 5.5" Carbon
listed above)
7 1/4" Low Ground
Clearance only
With 1 7/8" hole
and flat diaphragm
release fingers
52mm (2") 3/4"

* The 52mm size can also be used on Tilton 7 1/4" clutches, but the release effort will be higher. Using a smaller master cylinder will help to reduce pedal effort.

ImagePart No.DescriptionPriceStock Status
Tilton Replacement Bearing Only, 50mm Contact, Press Fit

163-59 

Tilton Replacement Bearing Only, 50mm Contact, Press Fit

$91.80In Stock
Tilton Replacement Bearing Only, 44mm Contact Diameter

TE 62-031 

Tilton Replacement Bearing Only, 44mm Contact Diameter

$91.80In Stock
Tilton Replacement Bearing Only, 38mm Contact Diameter

TE 62-008 

Tilton Replacement Bearing Only, 38mm Contact Diameter

 
5.0
$91.80In Stock
Tilton Replacement Bearing Only, 52mm Contact, Press Fit

163-60 

Tilton Replacement Bearing Only, 52mm Contact, Press Fit

 
5.0
$57.80In Stock