Red Silicone Hump Hose, 1 3/4 inch ID

Brand: Pegasus Silicone Hose

This hose is built for endurance and performance in custom turbo intake systems. Silicone rubber with 3-ply reinforcement makes this hose tough, reliable, and flexible to temperatures from -60°C to +180°C (-76°F to +356°F).

Hump hoses are designed to join two intake tubes while adding a flexible joint to isolate engine vibrations. Hand crafted and quality inspected to the highest European standards. Bright red with a smooth, shiny "wipe-down" finish. Approximately 4" long overall. The 3-ply reinforcement results in a working pressure rating in excess of 35 psi and a 4.5mm wall thickness (54mm / 2 1/8" OD). Use our Hose Joiners (HJ45) and our Lined Hose Clamps (Part No. 3613-2.50) to construct the exact shapes you need.

Silicone hose is for use on intake systems only. It is NOT for use on exhaust! Exceeding the temperature rating of 356°F will destroy it.