Brand: Facet-Purolator
For low fuel requirements on industrial engines up to about 150 horsepower, a single Solid State pump such as this one is usually sufficient. Facet fuel pumps have low power requirements (about 1 amp at 12 volts) and operate without troublesome seals or diaphragms. Facet pumps are compatible with gasoline, alcohol blends (up to and including E85), diesel, biodiesel, and fuel additives.
Maximum fuel delivery 32 gallons per hour at free-flow. Maximum pressure 3 to 4.5 psi. A typical application might flow 15 gph at 2 psi. 1/8 NPT female ports. The ground wire has a ring terminal and the positive wire has a 1-blade Packard connector.
An internal check valve prevents fuel from draining back to the tank. This pump does not have an anti-siphon valve, so fuel can be drawn through the pump when it is shut off. The 60 inch dry lift capability is greater than most other cube-style Facet pumps. The Facet 40271 pump was OEM on some Case New Holland equipment (Case part number 84130988). This pump can also replace Facet pump number 40288.
Beware of counterfeits! We only sell Genuine Facet pumps - not the unreliable foreign knock-offs sold elsewhere.
Not sure if this is the pump you need? Check out our article on Finding the Part Number on Facet Fuel Pumps.
