Beta Tools 910/58 Rotating Handle Ratchet Driver, 3/8" Drive

Brand: Beta Tools

The 910/58 Ratchet Handle from Beta Tools lets you work in the tightest, most inaccessible spots! Even if there isn't room to swing a wrench, you can still spin fasteners with this clever dual-function driver.

For high torque demands (such as breaking a fastener loose), the 910/58 works like a standard ratchet driver. The reversible 3/8" square drive has a 52-tooth ratchet mechanism that requires just 7 degrees of take-up. But if you don't even have 7 degrees of swing available, just rotate the handle to turn the fastener! A special gear drive inside lets the 910/58 operate like a low-torque right-angle drive. The handle even ratchets, so you don't have to spin it 360 degrees.

Ratchet head measures 38.5mm thick (A) x 37mm OD (Ø); measures 222mm long (L) overall (1 1/2" A x 1.46" Ø x 8 3/4" L). Weighs 417g (14.7 oz). Accepts any standard 3/8" square-drive socket (sold separately). Sold individually.

Note: Only use the rotating-handle drive to deliver low torque. For higher torque demands, push on the handle as you would a standard ratchet driver.