Setrab Thermal Fan Switch only, 200 F, 1/8 NPT

Brand: Setrab Oil Coolers

This thermal switch is designed to activate your fan relay when the fluid temperature reaches 200° F (93° C). The switch turns off when the temperature drops down to 185° F (85° C). Installs easily in any 1/8 NPT hole. Two 1/4" spade terminals make electrical hook up easy. The switch is non-grounding, so it can be installed anywhere in the system. Activation and reset temperature rating tolerances are +/- 3.6° F (+/- 2° C). A blue dot on the side of the switch identifies the 200°F version.

Note: This switch is not rated for the current draw of the fan. It must be used to control a fan relay (sold separately).

Switch only. Fan and relay are not included.