Brand: OMP Racing Products
The original OMP HRC-R racing seat was designed for the tight confines of modern GT cars (Ferrari, Mazda, etc) where FIA-spec roll cages get in the way of conventional seats. The wraparound head support is especially pinched in from the shoulders to allow room for cage clearance. High side bolsters and wide shoulder wings offer excellent lateral support. The front is upholstered in breathable "Airtex" mesh fabric; the back of the fiberglass shell is black gelcoat. FIA 8855-1999 homologated. Requires side-mount seat brackets (sold separately).
This XL version shares the same shape and design as the standard HRC-R, but is wider and taller to accommodate larger drivers. The shoulder wings and helmet bolsters are very close to the same size as on the original HRC-R.
HRC-R XL Dimensions:
External width at shoulders: 24" (no wider than the standard HRC-R)
Height at shoulders: 26.8" (1 3/4" higher than the standard HRC-R)
External maximum width at base: 19.3" (just 3/4" wider than the standard HRC-R)
Internal width at hips: 15 3/4" (1 3/8" more room than the standard HRC-R)
Overall height: 38 9/16" (3 1/8" taller than the standard HRC-R)
External depth at base: 18.9" (7/16" deeper than the standard HRC-R)
Internal width at helmet bolsters: 14.2" (3/8" narrower than the standard HRC-R)
External width at helmet bolsters: 20.5" (no wider than the standard HRC-R)
Weight: 22.7 lbs. (about 2 pounds heavier than the standard HRC-R)
| Note: (SL) = Large Package Shipping surcharge. This item incurs an additional large package shipping surcharge due to its size. The shipping estimate shown on the Review Cart page will already include this surcharge if applicable. This item cannot be sent by mail. |
