Facet Cube 12V Fuel Pump, 1/8 NPT, 1.5-4 psi, Stainless

Brand: Facet-Purolator

For moderate fuel requirements of engines up to about 150 horsepower, a single Solid State fuel pump like this one is usually sufficient. Pumps can also be combined in series or parallel to achieve any required pressure or flow. Facet fuel pumps have low power requirements (about 1 amp at 12 volts) and operate without troublesome seals or diaphragms. Facet pumps are compatible with gasoline, alcohol blends (up to and including E85), diesel, biodiesel, and fuel additives.

Maximum fuel delivery 28 gallons per hour. Maximum pressure 1.5 to 4.5 psi. Typical flow 15 gallons per hour at 2 psi. 1/8 NPT female ports. This pump has an application-specific 2-pin Deutsch connector installed on the wires and stainless steel internals for corrosion protection.

Built-in pressure relief means no flooding after shutting down a hot engine. The 60" dry lift rating allows some flexibility in mounting, and a one-way check valve prevents fuel from draining back to the tank when the pump is turned off. This is the OEM pump on some JCB construction equipment (JCB part numbers 333/W8991 and 400/X4858).

Beware of counterfeits! We only sell Genuine Facet pumps - not the unreliable foreign knock-offs sold elsewhere.

Not sure if this is the pump you need? Check out our article on Finding the Part Number on Facet Fuel Pumps.