Tilton 8400-Series 54mm Hydraulic Release Bearing, 2.04" Ht

Brand: Tilton Engineering

This direct-acting throwout bearing eliminates all lost motion due to cable stretch or linkage flex. The low profile (2.04" high) makes it small enough to be adapted to many different installations. Most applications will require fabrication of an adapter plate.

The radius-faced bearing has a 54mm contact diameter for AP Racing clutches, QuarterMaster 7.25" Low Ground Clearance clutches, Tilton 8.5" clutches, and similar clutches with a 1 7/8" diaphragm spring hole. Maximum travel is 0.70 inches, so a clutch pedal stop must be used to prevent damage to the clutch and the engine. Tilton recommends pairing this assembly with a 3/4" bore master cylinder (sold separately).

This assembly replaces Tilton Part No. 60-8000, which had a 52mm bearing.