Brand: Facet-Purolator
Solid-state Facet cube-style fuel pumps have low power requirements (about 1 amp at 12 volts) and operate without troublesome seals or diaphragms. Facet pumps are compatible with gasoline, alcohol blends (up to and including E85), diesel, biodiesel, and fuel additives.
This model is rated for maximum fuel delivery of 50 gallons per hour at free-flow. Maximum pressure 12 to 15 psi. Typical flow 30 GPH at 5 psi or 20 GPH at 8 psi. 1/8 NPT female ports.
This pump has an internal one-way (anti-drainback) check valve to prevent fuel from draining backwards through the pump. It does not have a positive shut-off (anti-siphon) valve, so fuel can flow through the pump when turned off. The huge 96 inch dry lift capability is greater than any other cube-style pump Facet offers. The positive and negative wires have a 2-pin Deutsch connector installed from the factory. (We do not carry the mating connector.)
This model is sold under Caterpillar part numbers 445-4733 and 495-0714 and Perkins Engine numbers 4950714 and 4950715. This pump is the replacement for Facet pump number 40324. It can also replace Facet pump number 40277 and 40299 (exactly the same specifications, except the Deutsch connector is different).
Beware of counterfeits! We only sell Genuine Facet pumps - not the unreliable foreign knock-offs sold elsewhere.
Not sure if this is the pump you need? Check out our article on Finding the Part Number on Facet Fuel Pumps.
Dodge Ram trucks note: This pump DOES NOT WORK as a lift (feed) pump on late 1990s-early 2000s Dodge Ram trucks with Cummins diesel engines! The VP44 injection pump requires a constant 12-15 psi inlet pressure. This pump only provides 12-15 psi pressure at very low flow rates and will not be enough to keep the engine running.
