Pour Spout Cap Assembly for Flo Fast Utility Jugs, 1" OD

Brand: Flo Fast Fluid Transfer Pumps

This assembly includes a fuel-resistant, translucent 16" flexible hose installed in an O-ring type utility jug cap. The cap has common 3.5" threads to fit most brands of utility jugs including our Flo-Fast jugs. Includes a dust plug which is tethered to the cap with a coated stainless cable.

Note 1: The threads on this cap will be slightly loose on Scribner brand jugs. We offer a different 18 Inch Filler Hose for Scribner Jug Caps (Part No. 2565), which fits Scribner brand caps.

Note 2: The O-ring gasket seals very well with minimal tightening of the cap. Overtightening the cap may crack it! Never tighten the cap beyond hand-tight, and never use any tools to tighten the cap.

Note 3: Always use the original solid cap while transporting your jug! The press-in plug included with this assembly only keeps debris out. It is not designed to keep fluids in the jug if it tips over.

Note 4: The 1" OD on this hose makes it too large to fit in an unleaded fuel filler opening.