Camloc 4002 Series Standard Grommet, up to 0.065" Panels

The 4002 series Camlocs are designed to be used with a metal grommet to help spread the attachment forces. This Standard ("Flush Plus Mounting") Grommet sits out 0.026" from the face of the panel. Mounts in panels up to 0.065" thick. Thicker panels require the Camloc 4002 Seres Standard Grommet for Panels to 0.094 Inch, Part No. 6081.

Note: This grommet adds 0.026" to the total grip length of the assembly. Be sure to add this amount to your total grip length calculation when determining the proper stud length. Requires a minimum 0.091" total grip thickness. If the assembly is thinner than 0.091", the back of the grommet will jam against the receptacle.