Customers who purchased this item also purchased:

Stainless Steel Worm-Drive Hose Clamp with Metal Lining

MS21042 Style B Jetnut, All Metal Locknut

AN816 Male NPT Pipe to Male AN Adapter

Aluminum Swivel Hose End for Steel Braided Hose, Blue - Red

AN960 Flat Washer (100 pack)

What our customers are saying:

"Subject: Service quality. You guys are sooooooo much better than the competition! Thanks."
J.W. from California

Stainless T-Bolt Clamps for Racing Mufflers and other uses

These 3/4" wide stainless steel clamps meet or exceed SAE J1508 specifications. T-Bolt clamps are perfect for use as muffler clamps, and are supplied with SuperTrapp mufflers. Even pressure all around the clamp prevents crimping the pipes, and the low profile reduces underhang below the car.

These clamps are also great for mounting items to chassis tubing, such as our Floating Saddle Mounts (Part No. 1825-100-Size). Be sure to order a large enough clamp to fit over the tubing AND the item being clamped to the tubing.

Each clamp includes an all-metal locking nut. The nominal size in the part number refers to the minimum inside diameter of the clamp. Sold individually.

Recommended Clamp Sizes for Silicone Hose*
Hose ID (Inch)	Hose ID (mm)	Clamp ID Range	Part No.
1"	25mm	1.25" to 1.39"	3614-1.25
1 1/8"	28mm	1.38" to 1.57"	3614-1.38
1 1/4"	32mm	1.50" to 1.69"	3614-1.50
1 3/8"	35mm	1.63" to 1.88"	3614-1.63
1 1/2"	38mm	1.75" to 2.00"	3614-1.75
1 5/8"	41mm	1.88" to 2.19"	3614-1.88
1 3/4"	45mm	2.13" to 2.44"	3614-2.13
2"	51mm	2.38" to 2.69"	3614-2.38
2 1/4"	57mm	2.50" to 2.81"	3614-2.50
2 1/2"	63mm	2.75" to 3.06"	3614-2.75
		2.88" to 3.19"	3614-2.88
2 3/4"	70mm	3.00" to 3.31"	3614-3.00
		3.25" to 3.56"	3614-3.25
3"	76mm	3.38" to 3.69"	3614-3.38
3 1/4"	83mm	3.50" to 3.81"	3614-3.50
3 1/2"**	90mm**	3.75" to 4.06"	3614-3.75
3 1/2"**	90mm**	4.00" to 4.31"	3614-4.00
4"	102mm	4.25" to 4.56"	3614-4.25
4 1/2"**	114mm**	4.75" to 5.06"	3614-4.75
4 1/2"**	114mm**	5.00" to 5.31"	3614-5.00
5"**	127mm**	5.25" to 5.56"	3614-5.25
5"**	127mm**	5.50" to 5.81"	3614-5.50
		5.75" to 6.06"	3614-5.75
		6.00" to 6.31"	3614-6.00

*Please Note:
These recommendations are specifically for our thick-wall Silicone Coolant and Turbo Intake Hoses. Thinner-wall hoses may require a smaller clamp. If you are unsure, measure the outside diameter of your hose AFTER it is installed on the tubing.

** These hose sizes are on the borderline between clamp sizes. The correct clamp size will depend on the size of the tubing. You must measure the OD of your hose AFTER it is installed on the tubing. Failure to measure may result in damage to the clamp or blowing the hose off the tube!

Enter desired order quantities below, then click the "Add selected quantities to cart" button.

Order Qty

Part No.

Desc.

Price

Stock Status

3614-1.25
Condition: New
SKU: 54280

Stainless Steel T-Bolt Clamp, 1.25" to 1.39" Diameter

1 to 5: $10.79 6 & up: $10.36

In Stock

3614-1.38
Condition: New
SKU: 57411

Stainless Steel T-Bolt Clamp, 1.38" to 1.57" Diameter

1 to 7: $7.59 8 & up: $6.96

In Stock

3614-1.50
Condition: New
SKU: 57412

Stainless Steel T-Bolt Clamp, 1.50" to 1.69" Diameter

1 to 7: $7.99 8 & up: $7.33

In Stock

3614-1.63
Condition: New
SKU: 57413

Stainless Steel T-Bolt Clamp, 1.63" to 1.88" Diameter

1 to 7: $8.19 8 & up: $7.51

In Stock

3614-1.75
Condition: New
SKU: 38379

Stainless Steel T-Bolt Clamp, 1.75" to 2.00" Diameter

1 to 7: $8.19 8 & up: $7.51

In Stock

3614-1.88
Condition: New
SKU: 38033

Stainless Steel T-Bolt Clamp, 1.88" to 2.19" Diameter

1 to 7: $8.29 8 & up: $7.60

In Stock

3614-2.13
Condition: New
SKU: 38034

Stainless Steel T-Bolt Clamp, 2.13" to 2.44" Diameter

1 to 7: $7.99 8 & up: $7.33

In Stock

3614-2.38
Condition: New
SKU: 38035

Stainless Steel T-Bolt Clamp, 2.38" to 2.69" Diameter

1 to 7: $7.99 8 to 59: $7.33 60 & up: $6.66

In Stock

3614-2.50
Condition: New
SKU: 85949

Stainless Steel T-Bolt Clamp, 2.50" to 2.81" Diameter

1 to 7: $7.99 8 & up: $7.56

In Stock

3614-2.75
Condition: New
SKU: 38258

Stainless Steel T-Bolt Clamp, 2.75" to 3.06" Diameter

1 to 7: $7.99 8 & up: $7.33

In Stock

3614-2.88
Condition: New
SKU: 72985

Stainless Steel T-Bolt Clamp, 2.88" to 3.19" Diameter

1 to 7: $8.49 8 & up: $7.79

In Stock

3614-3.00
Condition: New
SKU: 54281

Stainless Steel T-Bolt Clamp, 3.00" to 3.31" Diameter

1 to 7: $8.49 8 & up: $7.79

In Stock

3614-3.25
Condition: New
SKU: 54282

Stainless Steel T-Bolt Clamp, 3.25" to 3.56" Diameter

1 to 7: $8.29 8 & up: $7.60

In Stock

3614-3.38
Condition: New
SKU: 38259

Stainless Steel T-Bolt Clamp, 3.38" to 3.69" Diameter

1 to 7: $8.99 8 & up: $8.24

In Stock

3614-3.50
Condition: New
SKU: 54283

Stainless Steel T-Bolt Clamp, 3.50" to 3.81" Diameter

1 to 7: $8.99 8 & up: $8.24

In Stock

3614-3.75
Condition: New
SKU: 54284

Stainless Steel T-Bolt Clamp, 3.75" to 4.06" Diameter

1 to 7: $8.99 8 & up: $8.24

In Stock

3614-4.00
Condition: New
SKU: 54285

Stainless Steel T-Bolt Clamp, 4.00" to 4.31" Diameter

1 to 7: $8.59 8 & up: $7.88

In Stock

3614-4.25
Condition: New
SKU: 54286

Stainless Steel T-Bolt Clamp, 4.25" to 4.56" Diameter

1 to 7: $8.99 8 & up: $8.26

In Stock

3614-4.75
Condition: New
SKU: 54287

Stainless Steel T-Bolt Clamp, 4.75" to 5.06" Diameter

1 to 7: $9.29 8 & up: $8.52

In Stock

3614-5.00
Condition: New
SKU: 54288

Stainless Steel T-Bolt Clamp, 5.00" to 5.31" Diameter

1 to 7: $8.29 8 & up: $7.75

In Stock

3614-5.25
Condition: New
SKU: 54289

Stainless Steel T-Bolt Clamp, 5.25" to 5.56" Diameter

1 to 7: $8.79 8 & up: $8.06

In Stock

3614-5.50
Condition: New
SKU: 54290

Stainless Steel T-Bolt Clamp, 5.50" to 5.81" Diameter

1 to 7: $9.99 8 & up: $9.19

In Stock

3614-5.75
Condition: New
SKU: 54291

Stainless Steel T-Bolt Clamp, 5.75" to 6.06" Diameter

1 to 7: $7.99 8 & up: $7.33

In Stock

3614-6.00
Condition: New
SKU: 54292

Stainless Steel T-Bolt Clamp, 6.00" to 6.31" Diameter

1 to 7: $7.99 8 & up: $7.33

In Stock

Customers who purchased this item also purchased
Stainless Steel Worm-Drive Hose Clamp with Metal Lining	MS21042 Style B Jetnut, All Metal Locknut	AN816 Male NPT Pipe to Male AN Adapter	Aluminum Swivel Hose End for Steel Braided Hose, Blue - Red	AN960 Flat Washer (100 pack)

Stainless T-Bolt Clamps for Racing Mufflers and other uses

Order Qty

Part No.

Desc.

Price

Stock Status

Customers who purchased this item also purchased

Related Product Groups

Black Silicone Turbo Hose 135 Degree Elbows

Black Silicone Turbo Hose 180 Degree Elbows

Black Silicone Turbo Hose 45 Degree Elbows

Black Silicone Turbo Hose 45 Degree Reducing Elbows

Black Silicone Turbo Hose 90 Degree Elbows

Black Silicone Turbo Hose 90 Degree Reducing Elbows

Black Silicone Turbo Hose Straight Reducers

Black Silicone Turbo Hose Tees

Black Silicone Turbo Hose, 1 Meter Straight Lengths

Black Silicone Turbo Hoses & Elbows 2 1/2" (63mm) ID