Carbon Fiber Sheet with Honeycomb Core, 1/8 inch thick

Pegasus is now proud to carry the finest carbon fiber from the leading American manufacturer of composites for motorsports. These hand made parts feature the same high quality materials and attention to detail that has made them a favorite of ALMS, Daytona Prototypes, F2000, BMW Motorsports and other top teams and manufacturers.

This is genuine carbon fiber, not a plastic with a carbon fiber pattern printed on it. It is not intended as a cosmetic dress-up for show cars. Like all carbon fiber composites with optimal resin content, the surface displays tiny pinholes when viewed closely. One side is smooth and glossy; the back side is unfinished, with a rough matte texture.

This sheet has a honeycomb core which has been vacuum-bagged between two layers of 2x2 carbon fiber weave, with a gloss clear coat on one side. Total thickness is approximately 1/8 inch. It can be cut easily with a fine (24-32 tooth) bandsaw, jigsaw, or hacksaw and finished with a file or sandpaper. It is very strong and rigid, which makes it a great choice for just about any non-structural application. Suggestions include gauge panels, switch plates, and wing end plates. (We recommend facing the matte side towards the driver in gauge panels and switch plates to avoid blinding glare.) We normally stock 24" x 36" full sheets, 18" x 24" half sheets, and 12" x 18" quarter-sheets.*

We also offer Plain Carbon Fiber Sheet (Part No. CF001), which is somewhat less rigid and not able to support as much weight.

* Smaller, odd-size cut-off pieces are often available in addition to these sizes. Cut-off ends will be listed below whenever they are available. The sizes of the cut-offs varies, so we cannot guarantee future availability of any of those odd sizes.