Brand: Beta Tools
| Regularly $77.22 - Now only $54.05 - You save 30%! |
Installing cable ties with the proper tool makes the job faster and more uniform. The professional-quality 1743 Cable Tie Installation Tool from Beta Tools pulls the tie tight, then cuts the tail off flush with the lock. Works with all the cable ties we carry, or any nylon cable tie up to 9mm (0.35") wide.
Measures 195mm long (L) x 85mm tall (A) x 17mm wide (B). Weighs 282g (7 11/16" L x 3 3/8" A x 11/16" W, weighs 10 oz.) Steel construction with Beta orange powdercoated finish. Sold individually.
Use instructions
To install ties with the loose end (tail) pulled downwards through the lock:
Hold the 1743 tool with the "trigger" pointing up. Do not squeeze the trigger yet.
Feed the tail of the zip tie through the openings in both jaws.
Squeeze the handles together, leaving the trigger alone. Repeat this step as necessary until the tie is pulled tight.
While squeezing the handles, push the trigger down with your thumb to cut off the tail.
Release the handles to drop the cut-off tail.
To install ties with the loose end (tail) pulled upwards through the lock:
Hold the 1743 tool with the "trigger" pointing down, under your index finger. Do not squeeze the trigger yet.
Feed the tail of the zip tie through the openings in both jaws.
Squeeze the handles together, leaving the trigger alone. Repeat this step as necessary until the tie is pulled tight.
While squeezing the handles, pull the trigger to cut off the tail.
Release the handles to drop the cut-off tail.
