Tilton 8000 HRB Piston, Press Fit Outer, 0.850", 0.5" Stroke

Brand: Tilton Engineering

The Tilton Press-Fit Outer Race piston design holds the outer race of the contact bearing, allowing the inner race to rotate. The piston should be warmed in an oven while chilling the bearing to relax the press fit for installation.

This special low-profile piston is designed to fit a specially-prepared Tilton 8000-Series Ultra-Low-Profile HRB Base (Part No. TE 62-808). It has only 0.500" total stroke instead of the standard 0.700" stroke, but a clutch pedal stop should still be used to prevent overtravel. 0.850" (21.6mm) total height (0.835" engagement) provides 1.44" setup height. This part number replaces Tilton 62-688. Contact bearing not included.

This piston does not work with press-fit bearings held by the inner race (such as our 52mm Radius-Face Bearing, Part No. 163-60). It is designed to accept the Tilton 38mm Contact Diameter Bearing (Part No. TE 62-008) or the Tilton 44mm Contact Diameter Bearing (Part No. TE 62-031), each sold separately.