Order before 5:00 pm Central Time for Same Day Shipping on most In-Stock orders!
Pegasus is your source for Bell Racing Helmets!
 
 
 
Check us out on Instagram
 
Shop With Confidence - 30 Day Easy Returns - No Need To Call
 
Follow us on facebook
 

Cartek 16 Channel Power Distribution Panel

Click for a larger picture of Cartek 16 Channel Power Distribution Panel
Click for a larger picture of Cartek 16 Channel Power Distribution Panel

Brand: Cartek Automotive Electronics Ltd

This item qualifies for FREE Shipping in the continental United States!

This low-profile, solid-state switching unit can take the place of an entire array of switches, circuit breakers, and relays! The all-in-one flat panel houses 16 flush pushbutton switches with 2-level backlighting. All of the electronics are housed behind the panel, so there is no external module to hide. This 16-channel panel can handle even the relatively complex switching demands of an endurance racing car.

Fourteen of the channels can be set to handle 5, 10, or 15 amps. You can even pair two channels to handle 20, 25, or 30 amp loads. Two channels are pre-set to 7.5 amps specifically for windshield wiper functions (the wiper channel even has a "wiper park" signal). Each channel can function as Latching (with or without power-off memory), Latching with timer (30 seconds, 5 minutes, or 10 minutes), Momentary, Flashing, or Toggling. Several functions are even optimized for easy integration with the Cartek XR Battery Isolator or the Cartek Wireless Steering Wheel Controls.

A single M6 input stud on the back accepts battery positive voltage from 6 to 12 volts. Two AMP connectors (mates sold separately) handle power outputs and signal inputs from other sources. A red LED above each of the backlit switches indicates status on each channel (on, off, or fault) for easy troubleshooting. All configuration is done directly on the panel -- no computer required! Includes two sets of switch labels (one multicolor and one black and white) designed to let the backlight shine through.

The bezel of the switch panel measures just 195mm x 140mm (7.68" x 5.51"). The electronics portion (built in on the back of the panel) is a 108mm x 85mm x 30mm thick box (4.25" x 3.35" x 1.18" thick) not including the connectors on the back. The assembly weighs just 625g (22 oz).

Note: Requires wiring connectors which are sold separately so you can choose from fully-assembled pigtails or a crimp-it-yourself connector kit.

Made in the UK by professional racers, for professional racers.

Qty
Part No.
Price
Stock Status
1068-151

Condition: New

$1,379.00
In Stock
 
Related Product Groups
Cartek Power Distribution Panel