Setrab Series 9, 20 Row, Two Pass, M22 Ports

Brand: Setrab Oil Coolers

Setrab oil coolers have been popular in all levels of racing since the 1970s. The brazed aluminum construction provides the maximum cooling capacity in the smallest possible space, with minimal pressure drop. Coolers are pressure tested to 10 bar (145 psi) to ensure quality. The black epoxy finish protects against corrosion and looks great. The unique convertible inlet fittings (sold separately) allow you to change your plumbing without having to replace the cooler.

The Series 9 coolers measure 16" long (14 1/8" not including mounting tabs) x 1 7/8" thick. The 20 row size measures 6 1/16" tall (not including the hex on the port fittings). This special 2-pass version has a single female M22x1.5 port on the top and another directly inline on the bottom (in the photo, both ports are at the left end of the cooler). Oil enters through one port into the end tank, travels across the cooler, makes a U-turn in the other end tank, then travels back across the cooler a second time before exiting the second port.


Note: All oil coolers are relatively fragile. Care must be taken to avoid stressing the fittings when tightening connections (always use a backup wrench on the cooler fitting). The cooler should be mounted in a manner that will minimize vibration.

A great way to secure your cooler is with the Setrab Series 9 Mounting Bracket Kit, Part No. SET-23-9002 (sold separately).