Tilton 800-Series 38mm Hydraulic Release Bearing, 1.60" Ht

Brand: Tilton Engineering

This direct-acting Tilton hydraulic throwout bearing eliminates all lost motion due to cable stretch or linkage flex. The low profile (1.6" setup height) makes it small enough to be adapted to many different installations. Most applications will require fabrication of an adapter plate.

The radius-faced bearing has a 38mm contact diameter for clutches with a 1 3/8" diaphragm spring hole, including Tilton OT-V (4.5") clutches, Tilton OT-III (5.5") Clutches, and certain AP 5.5" carbon clutches (CP6913, CP6914, and CP7543 only). Maximum travel is 0.65 inches, so a clutch pedal stop must be used to prevent damage to the clutch and the engine. Tilton recommends pairing this assembly with a 3/4" bore master cylinder (sold separately).

We also stock the Hydraulic Release Bearing Replacement 38mm Bearing (Part No. TE 62-008) and Tilton Hydraulic Release Bearing Rebuild Kit (Part No. 163-51).