Brand: Tilton Engineering
This plastic single-chamber reservoir is designed specifically to mount to the current generation Tilton 76-Series Master Cylinders (Part No. 3507-Size, sold separately).* Instead of the traditional Tilton clamp-on plastic neck, this reservoir has an integrated base fitting with male 15/16" threads. Simply remove the black inlet adapter from the master cylinder and screw this reservoir in its place (torque to 25 lb-ft). The O-ring seal on the fitting eliminates the need for crush washers, thread sealant, or plumber's tape. Adds 4.43" (113mm) to the height of the master cylinder. Measures 2.25" (57mm) OD. Volume approximately 5.3 oz (158 ml). Includes cap and filter.
* Older first-generation 76-Series masters with a gold-anodized inlet adapter (made until approximately 2014) will not accept this reservoir. The compatible second-generation masters (2014 and later) have a black anodized inlet adapter.
Note: For Tilton 76-Series master cylinders only. Not designed to fit any other brand. The 15/16" thread is extremely unusual.
