OBP Premium v2 Kit Car Pedal Box w/ 2 MC for Cable Clutch

Brand: Optimum Balance Products (OBP)

This Premium 3-pedal floor-mount pedal box offers an all-inclusive system that is simple to install in most "Lotus 7" style chassis and other spaceframe kit cars. The lightweight steel box assembly includes billet aluminum Clutch, Brake, and Throttle pedals in one unit. All pedals ride on oil-impregnated bushings for smooth, consistent operation and long life.

Clutch pedal: For cable operation. Includes a bellcrank to convert forward pedal motion to a rearward cable pull.
Brake pedal: For dual master cylinder systems. Includes a built-in bias bar and 1 x 5/8" (front brake) and 1 x 7/10" (rear brake) master cylinders.
Throttle pedal: Can be adapted to accept a cable or a linkage. Includes a basic bellcrank linkage to convert forward pedal motion to rearward motion for front-engine applications. Spring-loaded with an adjustable return stop.

All three pedals feature adjustable pads. Weighs 5.8 lbs without master cylinders. Measures 19 7/16" Wide x 10 7/8" High at pedals x 5 1/16" Deep (master cylinders extend 4.2" forward from the bulkhead). A 1" square notch at the front end is designed to fit over a frame cross bar. Requires 2 remote fluid reservoirs (sold separately).

Fluid reservoirs and remote bias adjuster cables available separately:
Master Cylinder Reservois (use any on that page; master cylinders all have a 7/16-20 inler thread)
Tilton Bias Bar Remote Adjuster Cable (Part No. 3526) or OBP Bias Bar Remote Adjuster Cable (Part No. 3519-126)