AiM 7-Pin to CAN ECU Wiring Harness for SoloDL/EVO4S, 2M

Brand: AIM Sports

This harness connects your SoloDL or EVO4S to your ECU via CAN wiring. One end has a 7-pin 712 (screw-in) connector which will fit the 7-pin port on the SoloDL or the 7-pin "ECU" port on the EVO4S. The other end has 3 non-terminated wires (CAN+, CAN-, and Ground).

This is similar to the 2-meter (6.6 ft) cable supplied in the old Solo DL "CAN/RS232" kit (formerly Part No, MC-572), but without the RS232 or Power connections. AiM cable V02585040 (CAN only). Sold individually.

Note: For SoloDL or EVO4S only. Not for standalone Solo/Solo2, Solo2DL, EVO4, or EVO5. The 7-pin connector is not designed to work with any other AiM devices. This cable has an internal pull-up resistor which makes it incompatible with the Solo2DL.