Brand: Facet-Purolator
For low fuel requirements on engines up to about 80 horsepower, a single Solid State pump such as this one is usually sufficient. We also offer several other models with different flow rates and pressures for engines up to about 150 horsepower. Facet fuel pumps have low power requirements (about 1 amp at 12 volts) and operate without troublesome seals or diaphragms. Facet pumps are compatible with gasoline, alcohol blends (up to and including E85), diesel, biodiesel, and fuel additives.
Facet model 40366 specifications:
Maximum fuel delivery 15 gallons per hour at free-flow.
Maximum pressure 2 to 3.5 psi. (Typical flow 7 gph at 1 psi)
1/8 NPT female ports.
TYCO connector on positive wire, ring connector on negative wire
Dry lift rating: 40"
This model also features an anti-drainback check valve and an anti-siphon valve, so turning the pump off will positively stop flow in both directions. This pump was originally designed for Miller Electric and is sold under their part number 288718. This pump replaces Facet part numbers 40252 and 40178 (note that the electical connectors are different).
Beware of counterfeits! We only sell Genuine Facet pumps - not the unreliable foreign knock-offs sold elsewhere.
Not sure if this is the pump you need? Check out our article on Finding the Part Number on Facet Fuel Pumps.
