Bent Banjo #3 Hose End, 20 Degree, 3/8 inch (10mm)

This plated steel banjo hose end is designed to work with our -3 PTFE Lined Stainless Braided Hose (Part No. 3260-3, sold separately). It has a 20 degree bend in the tube which moves the hose away from the port face for access in tight areas. Sold individually.

These hose end fittings are reusable although the brass sleeve must be replaced each time a fitting is reused. One sleeve is included with each hose end. We also offer the Spare 3AN Brass Sleeves separately, Part No. 3261-3-SLEEVE.

This "thin" banjo hose end requires a 3/8" or 10mm Banjo Bolt (0.78" length) and two 3/8" Copper Crush Washers (Part No. 3241-3/8), sold separately.