| This item qualifies for FREE Shipping in the continental United States! |
The best is now even better!
This vice-mounted flaring tool easily creates consistent, factory-quality single or double flares on brake and hydraulic lines. The improved die jaw design eliminates any risk of damage to the tubing. Cam lever operation flares tubing in one quick motion (double flares require two operations of the handle). Punches are provided for 45 degree SAE double and bubble flares, DIN flares, and 37 degree AN flares. Everything comes packaged in a plastic storage case. Made in USA.
| Tubing Sizes and Flares* |
|---|
| Tube Size | 37 Degree | 45 Degree | DIN |
|---|
| 3/16"/4.75mm | Double | Double & Bubble | Bubble |
|---|
| 1/4" | Double | Double & Bubble | Bubble |
|---|
| 5/16" | Double | Double & Bubble | |
|---|
| 3/8" | Double | Double & Bubble | |
|---|
| 1/2" | Double | Double & Bubble | |
|---|
| 6mm | Double | Double & Bubble | |
|---|
| 8mm | Double | Double & Bubble | |
|---|
| 10mm | Double | Double & Bubble | |
|---|
* Note: Wall thickness for all sizes must not exceed 0.035" (0.89mm). Use only annealed tubing for best results.
We also carry many Replacement Parts for our High-Speed Flaring Tool.
