Brand: Aurora Bearing Company
These economical yet high precision bearings are for moderately stressed joints. The ball is heat treated and hard chrome plated alloy steel, with a steel race. The low carbon steel body limits the load rating to substantially less than our High Strength Alloy Steel Metric Rod Ends (Part No. 3067). However, they will provide very long life in lower stressed or non-critical uses such as sway bar links or shift linkage supports. Male metric threaded solid shanks only. Typical male rod end shown in photo. Aurora MM-M (right hand threads) and MB-M (left hand threads) series.
Note: These rod ends are not self-lubricating. They do not have a PTFE lining, so you must lubricate them periodically to prevent wear and galling. We also offer Aurora PTFE-Lined Carbon Steel Metric Rod Ends (Part No. AB-MMMT), which do not require lubrication.
Metric Jam Nuts (Part No. MAJM-Size) are sold separately.
| Aurora Carbon Steel Metric Male Rod Ends - MM-M (RH) / MB-M (LH) Series |
|---|
Bore
+.065mm /
−.013mm | Thread | Thread Length
+∕‑1.00mm | Center of Bore to End of Shank
+∕‑0.40mm | Ball Width
+∕‑0.13mm | Head Thickness
+∕‑0.13mm | Head Diameter
+∕‑0.38mm | Max Angle | Weight, g (Approx) | Static Radial Load Rating, Newtons | Part No. |
|---|
| 5mm | M5x0.8 | 20mm | 33mm | 8mm | 6.25mm | 16mm | 14° | 13 | 5168 N | AB‑MMM‑M5x0.8‑L or ‑R |
|---|
| 6mm | M6x1.0 | 22mm | 36mm | 9mm | 7mm | 19mm | 13° | 18 | 7296 N | AB‑MMM‑M6x1.0‑L or ‑R |
|---|
| 8mm | M8x1.25 | 25mm | 42mm | 12mm | 8.75mm | 22.25mm | 18° | 31 | 13,591 N | AB‑MMM‑M8x1.25‑L or ‑R |
|---|
| 10mm | M10x1.5 | 29mm | 48mm | 14mm | 10.5mm | 27mm | 17° | 68 | 20,603 N | AB‑MMM‑M10x1.5‑L or ‑R |
|---|
| 12mm | M12x1.75 | 33mm | 54mm | 16mm | 12mm | 30mm | 17° | 78 | 18,215 N | AB‑MMM‑M12x1.75‑L or ‑R |
|---|
| 14mm | M14x2.0 | 36mm | 60mm | 21mm | 14.25mm | 34.75mm | 21° | 118 | 29,840 N | AB‑MMM‑M14x2.0‑L or ‑R |
|---|
| 16mm | M16x2.0 | 40mm | 66mm | 21mm | 14.25mm | 38mm | 23° | 173 | 32,223 N | AB‑MMM‑M16x2.0‑L or ‑R |
|---|
