Hose & Hose Ends
Whether your system requires AN braided stainless or textile-reinforced rubber hose with AN or BSP fittings, we have the hose and hose ends you need.
Braided Stainless PTFE Hose is designed for high-pressure hydraulic applications such as brakes, clutches, and pressure gauge lines.
Braided Stainless Fuel / Oil Hose has a nitrile rubber lining. It is ideal for oil hoses and can be used for most fuels.
Super-Flex PTFE Hose is lighter and more flexible than the old Braided Stainless Fuel / Oil Hose. The PTFE liner makes it resistant to all fuels and oils.
Aramid Braided StartLite Racing Hose has a nitrile rubber lining and a flame-retardant outer braid. It is ideal for oil hoses and air hoses.
Fabric Braided StreetLite Racing Hose has a nitrile rubber lining with a fuel- and vapor-resistant inner layer. It is specifically designed for fuel hoses on street vehicles.
High-Temperature Rubber Hose is an economical hose for oil and fuel wherever the protection of the stainless steel overbraid is not needed.
For more specific recommendations, check out our Guide to Choosing the Right Type of Racing Hose.
|
Related Technical Documents |
Choosing the Right Racing Hose TypeThreaded Plumbing Fitting Identification GuideAN Fitting and Hose Sizes |
Related Product Categories |
High-Performance Plumbing |
Recent Top Selling Products for this category | ||
Quick-Disconnect Socket to 6AN Hose Barb, 2000 Series This Quick-Disconnect Socket to 6AN Hose Barb is lightweight and compact with excellent wear resistance. 6061-T6 aluminum bodies with brass valves, and it has a 200psi maximum operating pressure. | Quick-Disconnect Socket to 3/8" Push Lock Hose Barb This Jiffy-Tite 3000 series quick-disconnect socket to 6AN push lock hose barb flows 4.34 GPM with a 5 psi inlet pressure. Lightweight, compact, excellent wear resistance, 100% leak tested, and more. | Aluminum Swivel Hose End for Steel Braided Hose, Blue - Red Our red and blue AN Hose Ends fit nitrile-lined racing hose (stainless braided or Aeroquip Startlite). The swivel lets you "clock" the ends after assembly. |