Brand: Pegasus Silicone Hose
| Was $40.99 - Now only $34.99 - you save $6.00! |
Our silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand-crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from -50° C to +180° C (-76° F to 356° F).
This Guards Red 135 degree elbow has a 2" ID with a smooth, shiny "wipe-down" finish. The legs measure at least 4 inches long (measured from the centerline bend radius). The 4-ply reinforcement results in a working pressure rating in excess of 35 psi and a 5mm wall thickness (61mm / 2 3/8" OD). Use our Hose Joiners (HJ51) and our Lined Hose Clamps (Part No. 3613-2.75) to construct the exact shapes you need.
Note: This hose is NOT formulated for use in oil or fuel plumbing applications. It will handle an air-fuel mixture and will survive occasional spills and oil leaks, but it will not stand up to continuous exposure to liquid petroleum.
