Brand: Facet-Purolator
For low fuel requirements on industrial engines up to about 100 horsepower, a single Solid State pump such as this one is usually sufficient. Facet fuel pumps have low power requirements (about 1 amp at 12 volts) and operate without troublesome seals or diaphragms. Facet pumps are compatible with gasoline, alcohol blends (up to and including E85), diesel, biodiesel, and fuel additives.
Maximum fuel delivery 19 gallons per hour at free-flow. Maximum pressure 3.5 to 5 psi. A typical application might flow 10 gph at 2 psi. 1/8 NPT female ports. The ground wire has a ring terminal and the positive wire has no connector.
An internal check valve prevents fuel from draining back to the tank. This pump also has an anti-siphon valve, so fuel cannot be drawn through the pump when it is shut off. The 60 inch dry lift capability is greater than most other cube-style Facet pumps. The Facet 40176 pump was also OEM to Gehl, Ford Industrial, and other industrial engine suppliers (Ford part number F1JL9350AA).
Beware of counterfeits! We only sell Genuine Facet pumps - not the unreliable foreign knock-offs sold elsewhere.
Not sure if this is the pump you need? Check out our article on Finding the Part Number on Facet Fuel Pumps.
