AiM 7-Pin to CAN/RS232 Harness for Solo2DL/ECULog, 2m

Brand: AIM Sports

This harness connects your AiM Solo2DL or ECULog to your ECU via CAN or RS232 wiring. One end has a 7-pin 712 (screw-in) connector which will fit the 8-pin port on the Solo2DL or the 7-pin ECU port on the ECULog, and the other end has 6 non-terminated wires (CAN+, CAN-, RS232RX, RS232TX, Power, and Ground).

This is the same 2-meter (6.6 ft) cable supplied in the AiM Solo2DL for CAN / RS232 Connection Kit (Part No. MC-672) and AiM ECULog for CAN/RS232 Connection Kit (Part No. MC-8331). You can also use it to convert an AiM Solo2DL or ECULog from OBD-II / K-Line Connection. Sold individually.

Note: For Solo2 DL or ECULog only. Not for standalone Solo/Solo2, original Solo DL, EVO4, or EVO4S. The 7-pin connector is not designed to work with any other AiM devices. This cable does not have the internal pull-up resistor required by the original Solo DL.