Brand: AIM Sports
This cable connects your Solo2 DL or ECULog to the OBD-II port on your car for easy addition of RPM and other vehicle data. One end has the plug to fit the OBD-II diagnostic port, and the other end has a 7-pin 712 (screw-in) connector which will fit the 8-pin port on the Solo2 DL or the 7-pin port on the ECULog. The cable can support both CAN and K-Line protocols.
This is the same cable supplied in the current AiM Solo2 DL OBD-II Kit (Part No. MC-671). It is functionally the same but slightly longer than the cable included in the AiM ECULog OBD-II Kit (Part No. MC-8332). Add this cable to convert a Solo2 DL or ECULog originally equipped with CAN/RS232 or RPM wiring. 2.6 meter (8.5 feet) length will reach from your OBD port to the middle of the windshield in just about any car. Sold individually.
Note: For Solo2 DL or ECULog only. Not for standalone Solo/Solo2, original Solo DL, EVO4, or EVO4S. The 7-pin connector is not designed to work with any other AiM devices. This cable does not have the internal pull-up resistor required by the original Solo DL.
