Brand: Tilton Engineering
This item qualifies for FREE Shipping in the continental United States! |
This direct-acting Tilton throwout bearing eliminates all lost motion due to cable stretch or linkage flex. The 0000-Series was designed to be a direct bolt-on replacement for the Saab 900-style HRB, with the same bolt pattern and similar contact bearing size. The 1.5" (38mm) base ID is larger than the original Saab (1.2" / 30mm), which allows a little extra room for a larger input shaft.
This low profile 2.04" (51.8mm) setup height version is slightly shorter than the original Saab assembly, which had a 2.37" (60.2mm) setup height. This is ideal for installations where the original Saab 900 bearing is just right or up to 1/4" (7mm) too tall.
The 54mm contact diameter is the same as the original Saab unit. It is ideal for clutches with a 1 7/8" diaphragm spring hole. This includes Tilton 8.5" clutches and most AP Racing 4.5", 5.5", and 7.25" racing clutches. Maximum travel is 0.70 inches, so a clutch pedal stop must be used to prevent damage to the clutch and the engine. Tilton recommends pairing this assembly with a 3/4" bore master cylinder (sold separately).