This high-pressure hose has a smooth, extruded PTFE liner with a stainless steel wire braid cover. An additional black plastic outer cover* provides a clean appearance while helping to keep dust and grime out of the braid. Rated for use at -90°F to +450°F. Maximum operating pressure 3,000 psi. Minimum burst pressure 12,000 psi.
| Stainless Steel Braided PTFE Hose |
|---|
Hose
Size | Hose I.D. | Hose O.D. | Equivalent
Tubing OD | AN Fitting
Thread Size | Operating
Pressure | Min. Bend
Radius | Part
No. |
|---|
| -3 | 0.138" | 0.295" | 3/16" | 3/8-24 | 3000 psi | 1.5" | 3260‑3 |
|---|
This -3 size has the same ID as standard 3/16" steel tubing. It is the most common size for auto racing brake lines and oil pressure gauge lines. It is also popular for clutch lines. (Note: Only steel, stainless steel, or high pressure brass fittings should be used with brake lines. We recommend against aluminum fittings in brake systems.)
Note: You must strip the black outer covering back prior to installing your hose ends. The hose end collar must bear against the braid, not against the black covering.
Assembly Instructions for Steel Braided PTFE Brake Hose
