Brand: Cartek Automotive Electronics Ltd
| This item qualifies for FREE Shipping in the continental United States! |
This compact 6-switch panel is specifically designed to drive the Cartek PDM Power Distribution Module, Part No. 1068-112 (sold separately), PLUS your Cartek Battery Isolator (also sold separately), and your electrically-actuated fire suppression system (also sold separately).
From left to right:
A round blue "latching" pushbutton switch (push once to turn on, press again to turn off), marked with a red "lightning bolt" on a blue triangular background, controls your Battery Isolator.
Three square black "latching" pushbutton switches (press once to turn on, press again to turn off) with a red LED status indicator built in, plus a round green momentary-conatact (normally off) pushbutton switch.
A round red momentary-contact pushbutton switch, marked with a red E on a white background in a red circle, actuates your fire system. This switch includes a plastic guard to minimize the chances of accidental actuation.
Small blank panels near each of the four unassigned switches let you add your own labels.
Includes pigtail wiring harness with 9 unterminated wires. Simply splice four of the wires to the Cartek PDM wiring harness, 2 of the wires to your Isolator, 2 to your fire system, and connect the last wire to ground.
Note: For use with Cartek Power Distribution Module only. These low-amp switches cannot be used to switch anything other than as described here. Cartek PDM sold separately.
