AiM Eclipse Linear Travel Pot, 10mm OD with QR Ball Joint

Brand: AIM Sports

Linear Travel Potentiometers, AKA Linear Variable Displacement Transducers (LVDTs) or position sensors, can be used to measure virtually any linear motion or position. Monitor shock and suspension travel, ride height at speed, throttle position -- even wing or spoiler deflection at speed.

This version has a quick-release stud-type ball joint at each end. Each stud has M4x0.7mm male threads (5.5mm long). The fiber-reinforced composite body measures 10mm (3/8") OD. Color may vary at manufacturer's discretion. The size listed is the stroke (travel) length.

Note: Overextending or bottoming out these sensors will destroy them! If your application requires the maximum travel available, you may want to consider fabricating a linkage to measure a proportional but smaller travel.

These sensors have a 500mm (19.7") long, petroleum-resistant cable with a 719 (four-pin plastic push-on type) connector at the end. Use a My Chron 719-719 Patch Cable (Part No. MC-211) to connect to any AiM MX-series dash logger or EVO5 logger. The EVO4S logger and Channel Expansion Hub require a 712-719 Adapter Cable (Part No. MC-210).